emotor

Please note: It is not a normal charger, it is a 0V repairing charger for the EM-02 floor scrubber machine. If your battery is running out the batt...

Commercial 15" Floor Scrubber Brush, Fit for Emotor 25 and other scrubber machine with 15" brush disc.It is rotary brush. Please double check the...

Input: AC 100-240V; Output: DC 24V 2A; Power: 45W; Connector Tip : Male 1-pin Compatible with :  KR8803 Wheelchair, Battery with KEY

50A fuse for floor scrubber machine( fits for our Emotor 300 and Emotor 500 Floor Scrubber Machine)

80A fuse for floor scrubber machine( fits for our Emotor 300 and Emotor 500 Floor Scrubber Machine)

A pair rubber squeegee for EM-02 Front rubber squeegee is 42cm/16.54" Behind rubber squeegee is 44cm/17.32"

A pair of Squeegeee If you need buy more, please contact us to get discount. Thanks

If your front wheel is loosen or fallen off, please replace the front strut or re-screw them tightly again.

One piece plastic squeegee assembly for EM-02 floor scrubber machine Please note: do not have rubber squeegee on it. If you need the rubber squeege...

It is only a battery charger that fit for Emotor 300X 500X Please note: It is American Plug Type. If you need another male plug, please contact us ...

It is an Original Lion Battery for Emotor KR8807 or KR8807B electric wheelchair. Package: one piece battery Please note: Do not include the battery...

One piece battery hand grip for the battery case.

Battery Hold Bracket for KR8807 Wheelchair.

Factory original brush for EM-K3 Floor Scrubber Machine

Brush Motor for EM-25 Floor Scrubber Machine Net Weight: 8KG/17.64LBS

Package: one brush skirt for scrubber machine.  Note: Only fit for 15 inch brush.

One piece Bumper Pulley Wheel on Squeegeee Assembly of Emotor 300X Emotor 500X Sorry we have to ship this item from our factory, so the cost is mai...

Package: one piece clutch plate  Fitment: fit for our emotor 19" walk behind floor scrubber machine (Emotor 300 Series) and 21" ride on floor scrub...

Original wire line kits on EM-25 floor scrubber machine. Please note, if your machine is equipped with two connectors (black and gray, or red and g...

Original Control Panel for EM-25 Easy replacement, but please make sure the old one is damaged.  If the control panel is damaged, normally there is...

Circuit control panel of EM-02  Attached the instruction of how to replace the CPU (Circuit Control Panel).

Package includes: One Piece Electronics Relay for floor scrubber machine The second picture is an installation reference for relays. Normally there...

The 19-inch floor scrubbing pad is designed to be used with automatic floor scrubbers or rotating floor buffers. Installed on the Scrubber brush he...